Fire Door Gap Gauge Checker Tool, Small and Light, Pocket Fit

Product Information

Watch the video to find out for your self that the Fire Door Gap Gauge is a simple to use, highly efficient “must have” tool that every inspector, fire marshal, commercial property/maintenance manager and fire department needs in their toolbox. The brown or white rebated intumescent fire door gap seal contains expandable intumescent material which, when subjected to heat, forms a tight seal around the fire exit. Step 3– Verify that your door gap gauge that the gaps fall within the clearances outlined by NFPA 80 and change as required. In addition, the closing speed can be adjusted and holding angles can be set to between 65 ° and 105°.

Our team of qualified fire door surveyors will measure, specify and quote for fire doors in the locations where you require them. This service is ideal for new premises where fire doors need to be fitted, and those that need to replace older fire doors that are damaged or no longer compliant. Correct specification, installation and maintenance of fire doors are critical to ensuring your building is safe. The clearance under the bottom of a door and raised non-combustible sills will be an optimum of 3/8 ″.Fire door closersThe purpose of a fire door is to compartmentalise different sections of a building and by doing so contain the spread of fires. An overhead door closer – or fire door closer – is a device that ensures that a fire door closes after being opened. Legally, fire doors should remain shut and the installation of fire door closers enforces this requirement. This is the ideal solution for holding a fire door open and is essential for areas where access is a necessity. We can program these devices to have timed releases which will ensure the fire door is then lightweight, easy to handle and swings freely. The fire door gap required varies according to the function of the door, however, best practice is to ensure that the gap:

Fire pillows are designed to provide a temporary or permanent barrier against fire, used in spaces which frequently change their layout and materials. They consist of a waterproof glass cloth bag filled with organic fillers infused with intumescent additives that expand once exposed to heat. Step 1– Find out what kind of door and frame you are inspecting to determine the required NFPA 80 requirements. Door Requirements – For the Top & Verticle EdgeProtecting people and property through 3rd party accredited Passive Fire Protection services, nationwide. The clearance at the underside of the bottom of a door and non-combustible surface shall not exceed 3/4 ″. Purchasing new or replacement fire doors requires accurate measurements and detailed knowledge on required materials and hardware to ensure compliance with regulations. Fire doors are a vital aspect of fire safety in any building, but they must be installed correctly and in good condition to ensure that occupants and escape routes are protected from the rapid spread of fire and smoke.