RØDE SC4 3.5mm TRS to TRRS Adaptor, Smartphone

Product Information

TRS connectors are used with monitoring headphones, studio monitors, mixers, audio interfaces, and instruments. Allows you to connect your standard TRS (3-pole) 3.5mm microphone connector to your TRRS (4-pole) smartphone

USB-A – You should be familiar with this type of cable. USB-A is one of the most common connections found on virtually every modern computer (and many other devices). Itiseasy to identify as itislarger than other USB types. You know the one – the classic rectangular USB cable. In consumer electronics, they are used to carry a microphone signal along with the stereo audio signal. The SC10 is a TRRS to TRRS cable designed to connect the VideoMic NTG (which has an auto-sensing TRS/TRRS output) to cameras or mobile devices, but can be used with any TRRS device. In short, a balanced audio cable cancels out the noise and gives you more clear audio signal. This will give you 4dB extra headroom in audio mixing and mastering. If you don’t know the difference between balanced and unbalanced audio signals then you should read this article.The SC16 is a 300mm-long USB-C to USB-C cable designed to connect RØDE microphones with a USB-C output to USB-C compatible devices. SC17 – USB-C to USB-C Cable (1.5m)

The SC7 is a TRS to TRRS patch cable, designed to allow microphones with a 3.5mm TRS output, such a RØDE VideoMic or Wireless GO, to connect to devices with a TRRS input like a computer or mobile device. SC8 – 3.5mm TRS to TRS cable (6m) To help you decide which one is right for you, we’ve put together the ultimate RØDE cable and adaptor guide, so you can get recording in no time.

Rode SC4

Most microphones have either a 3.5mm, USB or XLR audio output (or a combination of these)for connectingthemto different devices.